Skip to main content
Heating

Boilers & Hydronic Heating

Boiler installation, repair and maintenance for baseboard, radiator and radiant floor systems in existing Kitsap County homes.

Hot Water Heat for Kitsap County Homes

A hydronic system heats your home with water instead of air. A boiler warms the water, a circulator pump moves it through a loop of pipes, and baseboard, radiators or radiant floor tubing release the heat into each room. The cooler water returns to the boiler, gets reheated and makes the trip again. With no ducts and no blower pushing air around the house, hydronic heat is quiet and even from room to room.

West Sound Comfort Systems installs, repairs and maintains boilers and hydronic systems in existing homes across Silverdale, Bremerton, Poulsbo and Port Orchard. We work on gas, oil, electric and combination boilers, condensing and conventional models, and the baseboard, radiators and radiant floors they feed. This page is the starting point. Each service below has its own page with the details.

What to Expect From West Sound Comfort Systems

  • Professional, prompt service. One team handles your boiler from the first evaluation to the final walkthrough.
  • Expert technicians for every boiler type. Gas, oil, electric and combination boilers, condensing or conventional.
  • Upfront pricing options. You see your options and the price before any work begins.
  • A free estimate first. Ask about any boiler or hydronic project and get a clear estimate before you decide.
  • Work backed by our warranty. Repairs and installations carry our 5-Year Parts & Labor Warranty.

Related Boiler Services

What Our Boiler & Hydronic Services Include

Installation and Replacement

We evaluate your home in person, size the boiler to the house and its distribution system, remove the old unit, install and connect the new one to code, pressure-test the lines and confirm every safety control before we walk you through it.

Repair and Diagnostics

We check pressure, circulation, ignition and safety controls to find the actual cause, then explain your repair options before any work starts. We repair pumps, valves, expansion tanks and controls on newer high-efficiency boilers and older models alike.

Maintenance and Tune-Ups

We inspect and clean key components, check electrical connections and safety controls, test ignition and look at how the whole system performs, so small issues get caught early.

Radiant Floor Heating

Radiant floors are part of our hydronic work. We handle the full system rather than handing off pieces to separate contractors.

Signs Your Boiler Needs Attention

  • Some radiators or baseboard units stay cool while others heat normally.
  • The boiler bangs, gurgles, kettles or whistles.
  • Water collects near the boiler, or the relief valve keeps releasing water.
  • The pressure gauge reads lower or higher than it used to.
  • The pilot light goes out or the burner won't fire reliably.
  • Your heating bills climb with no change in how you use your home.

Any of these signs is worth a look, and routine maintenance catches small issues early. Our guide to signs your boiler is failing covers each one in more detail. Our Boiler Repair & Service page covers what we check.

How a Hydronic Heating System Works

The Boiler

The boiler is the heat source. It burns gas or oil, or uses electric elements, to heat water for the system. Some boilers also heat your household hot water, either through a combination design or a separate tank connected to the boiler.

Circulator Pumps and Zones

A circulator pump pushes the heated water through the pipes. Many homes are split into zones, each with its own thermostat and either its own pump or a zone valve, so you can heat the rooms you use without heating the whole house the same way.

Expansion Tank and Pressure

Water expands as it heats. The expansion tank gives that extra volume somewhere to go, which keeps pressure in a safe range. A pressure relief valve is the backup if pressure climbs too high. When an expansion tank fails, the relief valve may drip or the pressure gauge may swing more than usual.

Controls and Thermostats

Thermostats tell each zone when to call for heat, and the boiler's controls decide how hot to make the water. Outdoor reset controls lower the water temperature as the weather warms, which helps the boiler run more evenly and keeps rooms from overshooting. Controls play a large part in how evenly an existing hydronic system heats.

Air Vents and Purging

Air gets into a hydronic system whenever it's filled or opened for service. Air vents and air separators let it escape, because trapped air blocks circulation, causes gurgling and leaves radiators cool at the top. After work on the piping, the system is purged so water fills every loop again.

Baseboard, Radiators and Radiant Floors

Baseboard and cast-iron radiators release heat into the room from along the walls. Radiant floor tubing warms the floor itself, which then warms the room from the ground up. Radiant floors run on cooler water than most radiators, which is one reason they pair well with condensing boilers.

Choosing the Right Boiler for Your Home

The right boiler depends on your distribution system, venting, fuel and hot water needs. The type of baseboard, radiators or radiant floors already in the home often narrows the choice. We size and choose it in person, and our Boiler Installation & Replacement page explains how. For a broader look at the options, see choosing a home heating system.

Our Approach: Guidance, Not Guesswork

Every boiler visit starts with listening. We ask how your home heats today, which rooms give you trouble, what the boiler sounds like and whether hot water is part of the picture. Then we look at the whole system, not just the boiler: the pumps, the zones, the pressure and the baseboard, radiators or radiant floors it feeds. We explain what we find in plain terms and lay out your options, whether that's a repair, a tune-up or a new boiler. You get clear pricing before any work begins, so the decision stays yours. We also walk you through how the system operates and how to maintain it. Repairs and installations are backed by our 5-Year Parts & Labor Warranty, and financing is available for larger projects.

Keep Your Home Warm With Hydronic Heat

West Sound Comfort Systems has been locally owned since 2016, and our owners have served Kitsap County since 1999. Our Comfort Club plans include hydronic coverage; see the plans page for details. Have a question first? Our FAQs cover common boiler topics. Request Boiler Service and get a free estimate.

Frequently asked questions

What is hydronic heating?
Hydronic heating uses water heated by a boiler and pumped through pipes to baseboard, radiators or radiant floor tubing, which release the heat into your rooms.
Is a boiler the same as a water heater?
No. A boiler heats water for your home's heating system. A water heater supplies hot water to taps and showers. A combination boiler does both from one unit.
Do you work on oil boilers?
Yes. We repair, replace and maintain oil boilers, and we handle oil-to-gas conversions in existing homes.
Which boiler brands do you service?
We install Navien and NTI boilers and service all brands, including Weil-McLain, Lochinvar, Buderus, Viessmann and HTP.
Can a boiler run radiant floor heating?
Yes. Radiant floor tubing runs on heated water from a boiler.
Do you work on existing homes only?
Yes. Our boiler work covers replacements, retrofits, remodels and additions.
Is boiler work covered by a warranty?
Yes. Repairs and installations are backed by our 5-Year Parts & Labor Warranty.

Ready for Boilers & Hydronic Heating?

Call West Sound Comfort at (360) 564-1187 for honest, upfront service across the Kitsap Peninsula.